|
|
VAROCOAT-ONE VARO-40T is One-Pack Polyurethane Tar System for water proofing.
|
|
| FEATURES |
 One-Pack Polyurethane System.
No problem with mixing.
Good adhesion to substrate, persistence and chemical resistance.
Decrease of construction cost and time.
Easy application and repair.
|
|
| APPLICATION |
Applicable every part.
Non-exposed water proofing agent.
|
|
| PROPERTIES |
Appearance : Black viscose liquid.
Viscosity : 5,000±2,000 cPS/25°C
Density : 1.4±0.1 (g/cm3)
Solid Content(%) : 90±2
Tacky Free Time(hrs at 25°CX60%RH) : max 3
Curing Time(hrs/25°CX60%RH)
- Coating Thickness 1.5mm : max 24
- Coating Thickness 3.0mm : 24 - 48
|
|
| APPLICATION METHOD |
Please use after coating primer
(VARO-BP/One Packing PU-Tar System,Curing time : 2-5hrs) on the substrate.
Must be double coating(each of 1.5mm) to 3.0mm coating.
Please coat with float, roller, brush and saw tooth from vertical part.
When you coat the joint part of vertical and horizontal, attached reinforcement
(glass fiber or fiber) before coating VARO-40T.
|
|
| PROPERTIES OF FILM |
Hardness( Shore A ) : 40±10
Tensile Strength ( kgf/cm2 ) : over 25
Elongation( % ) : over 600
Tear Strength ( kgf/cm ) : over 10
|
|
| HANDLING & STORAGE |
VAROCOAT-ONE VARO-40T can be stored for 6 months at below 25°C
Please avoid exposure to humidity or temperature above 50°C for long time.
Please avoid contamination of water and alcohol.
The product is very sensitive to air, therefore you must use all the product after open the
container.
Packing : 20kg Can
|
|
| NOTICE |
The above enclosed system are designed to help you select system for typical system.
For more information on VAROCOAT-ONE VARO-40T, simply return the product information request sheet via FAX and E-mail.
The technical support formulation and application specialists at HEPCE CHEM are standing by to assist you... whatever your needs.
E-mail: hepce@hepce.com TEL: +82-31-491-1611 FAX: +82-31-491-7400
|
|
