 ANIONIC TYPE |
|
| IMPRESSION HWU-400A is water dispersed polyurethane resin for coating and adhesive. |
|
| SPECIAL PROPERTIES |
 Contains no organic solvents or emulsifiers.
Low VOC, Less Hazard, Less Toxicity, Acceptable Environment
High Lightfastness.
Formation of flexible and good physical properties film.
Good resistance of Hydrolysis
|
|
| CHEMICAL COMPOSITION |
Anionic Polyether/ester Polyurethane Dispersion.
Solid Content : 35%
-Solvent : Water 62%, Cosolvent 3%
|
|
| PROPERTIES of DISPERSION |
Appearance : Semi Transparency.
pH : 7.2-7.5
Viscosity : 300±50 cPS/25°C
Density(25°C) : 1.02(g/cm3)
|
|
| PROPERTIES of CASTING FILM |
Appearance : Transparent
100% Modulus : 20±5 Kg/cm2
Tensile Strength : 262±100 Kg/cm2
Elongation : 500±100 %
|
|
| HANDRING and STORAGE |
IMPRESSION HWU-400A can be stored for 6 months.
Avoid exposure to temperatures above 50°C for long periods.
The product is sensitive to frost and must not be stored at temperatures below 5°C.
It cannot be thawed once it has frozen.
Containers must be kept tightly sealed because otherwise a film which cannot be
redispersed may form as result of evaporation of water.
Packing : 125Kg Plastic Drum
|
|
| NOTICE |
The above enclosed system are designed to help you select system for typical system.
For more information on IMPRESSION HWU-400A, simply return the product information request sheet via FAX and E-mail.
The technical support formulation and application specialists at HEPCE CHEM are standing by to assist you... whatever your needs.
E-mail:hepce@hepce.com TEL: +82-31-491-1611 FAX: +82-31-491-7400
|
|
